Copper II Chloride or Cupric Chloride USP Manufacturers

Aadhunik Industries is a manufacturing group company. Aadhunik Industries is pioneer manufacturers of Specialty Chemicals, Pharmaceutical Excipients, Food Fragrance & Flavor chemicals in India. It has toll manufacturers and representatives in UAE, Europe, Canada & USA and agents & customers in all countries like USA, Canada, Europe, UAE Dubai, South Africa, Tanzania, Kenya, Egypt, Nigeria, Uganda, Turkey, Mexico, Brazil, Chile, Argentina, Malaysia, Indonesia, Thailand, Korea, Japan, etc. Copper II Chloride or Cupric Chloride Dihydrate Anhydrous USP Reagent Grade Manufacturers.

The units have one or more of the certifications like FDA GMP, ISO 9001, ISO 22000, HACCP, REACH, Kosher & Halal and DMF support is available.

Copper II Chloride or Cupric Chloride Dihydrate Anhydrous USP Reagent Grade Manufacturers

Copper Chloride or Cupric Chloride Dihydrate: CAS No.: 10125-13-0 and Copper Chloride or Cupric Chloride Anhydrous: CAS No.: 7447-39-4

Cupric Chloride Dihydrate or Copper Chloride Dihydrate:
CAS No.: 10125-13-0 (dihydrate)
EINECS: 231-210-2
Molecular Formula: CuCl2 -2H2O (dihydrate)
Formula Weight: 170.48 g/mol (dihydrate)

Specifications of Cupric Chloride Dihydrate Chemically Pure
Assay as CuCl2-2H2O: 99% minimum.
Appearance: Green to Bluish-Green ---
Nitrate as Cu(NO3)2: ≤0.1%
Moisture: ≤3 %
Free HNO3: ≤0.05 %
Iron as ‘Fe: ≤0.005%
pH 5% Solution: 3.0- 4.0
Matter Insoluble in H2O: ≤0.01%

Cupric Chloride USP Grade
CuCl2-2H2O -- 170.48
Copper chloride (CuCl2) dihydrate.
Copper(2+) chloride dihydrate [10125-13-0].
Anhydrous 134.45 [7447-39-4].

Cupric Chloride contains not less than 99.0 percent and not more than 100.5 percent of CuCl2, calculated on the dried basis.

Identification: A solution (1 in 20) responds to the tests for Chloride and for Copper.
Loss on drying: Dry it at 105 for 16 hours: it loses between 20.9% and 21.4% of its weight.
Insoluble matter: Transfer 10 g to a 250-mL beaker, add 100 mL of water and 2 mL of hydrochloric acid, cover the beaker, and heat to boiling. Digest the hot solution on a steam bath for 1 hour, and filter through a tared, fine-porosity filtering crucible. Rinse the beaker with hot water, passing the rinsings through the filter, and finally wash the filter with additional hot water. Dry the filter at 105C, the residue weighs not more than 1.0 mg (0.01%).
Sulfate: (0.005%).
Limit of sodium: The limit is 0.02%.
Limit of potassium: The limit is 0.01%.
Limit of calcium: The limit is 0.005%.
Limit of iron: The limit is 0.005%.
Limit of nickel: The limit is 0.01%.
Organic volatile impurities: meets the requirements.

Cupric Chloride Anhydrous or Copper Chloride Anhydrous:
CAS No.: 7447-39-4 (anhydrous)
EINECS: 231-210-2
Molecular Formula: CuCl2 (anhydrous)
Formula Weight: 134.45 g/mol (anhydrous)

Specifications of Anhydrous Cupric Chloride Chemically Pure:
Appearance: Fine Brownish Powder
Assay: 97.00 % minimum.
Cuprous Chloride: ≤0.05%
Free Moisture: ≤1%
Water Insoluble: ≤0.1%
Iron: ≤0.1%
Sulphate: ≤0.06%
Lead: ≤10 ppm.
Arsenic: ≤10 ppm.
Zinc: ≤20 ppm.
Nickel: ≤20 ppm.

Copper II Chloride or Cupric Chloride Dihydrate Anhydrous USP Reagent Grade Manufacturers

Aadhunik Industries
Ankleshwar Gujarat &, Mumbai, India
TEL: (OFFICE) 91-22-23774610, 23723564.

Exports to USA, Canada, Europe, UAE, Dubai, South Africa, Tanzania, Kenya, Nigeria, Egypt, Uganda, Turkey, Mexico, Brazil, Chile, Argentina, Malaysia, Indonesia, Thailand, Korea, Japan, etc.